MCC Multi-Grout Cement 60 is a high-strength cement-based grouting compound used to set stainless steel balustrade posts and spigots permanently into pre-drilled holes in concrete, masonry, brick, and stone substrates. Mixed with water on site to a pourable consistency, it is dispensed into the drilled hole around the post stem and cures to a hard, load-bearing set that anchors the post firmly into the substrate.
The 2kg bag is suited to smaller installations — a single post or a small number of fixings where the total volume of grout required is modest. It is also a practical option for repair and replacement work where an individual post needs to be reset without the need for a larger bag.
Mix with clean water to the manufacturer’s recommended consistency before use. Ensure the drilled hole is clean and free of dust and debris before pouring, and hold or brace the post at the correct position and plumb until the grout has set sufficiently to support itself.
Specifications
- Type: Cement-Based Grouting Compound
- Product: MCC Multi-Grout Cement 60
- Pack Size: 2kg
- Mixing: Mix with clean water on site to a pourable consistency
- Application: Setting balustrade posts and spigots into coredrill holes in concrete, masonry, brick, and stone
- Coverage: Dependent on hole diameter and depth
- Category: Hardware & Consumables – Grout
Installation Note
Ensure drilled holes are clean, dry, and free of dust before pouring the grout. Mix only what you can use before the grout begins to set. Hold or brace posts at the correct position and plumb until the grout has cured sufficiently to support the post independently. Do not apply load to the balustrade until the grout has fully cured.
Not Sure What You Need?
Submit a free DIY Guidance request and one of our experts will confirm whether grout or epoxy is the correct setting compound for your installation, and how much you will need.
