MCC Multi-Grout Cement 60 in the 5kg bag is the most practical size for a standard residential balustrade installation. Whether you are setting a row of coredrill posts along a deck perimeter or a series of frameless glass spigots around a pool, the 5kg bag provides enough grouting compound to complete a typical single-project run without the excess of the 25kg bulk bag.
Mixed with clean water on site to a pourable consistency, the grout is dispensed into the drilled hole around each post or spigot stem and cures to a hard, load-bearing set. The cement-based formulation provides reliable anchoring strength in concrete, masonry, brick, and stone substrates and is a practical alternative to chemical anchor fix epoxy where larger hole volumes make epoxy less economical.
The 5kg bag strikes the right balance between quantity and practicality for most DIY residential projects — enough to cover multiple posts in a single mix session without wastage.
Specifications
- Type: Cement-Based Grouting Compound
- Product: MCC Multi-Grout Cement 60
- Pack Size: 5kg
- Mixing: Mix with clean water on site to a pourable consistency
- Application: Setting balustrade posts and spigots into coredrill holes in concrete, masonry, brick, and stone
- Coverage: Dependent on hole diameter and depth — suited to standard residential balustrade projects
- Category: Hardware & Consumables – Grout
Installation Note
Ensure drilled holes are clean, dry, and free of dust before pouring the grout. Mix only what you can use before the grout begins to set. Hold or brace posts at the correct position and plumb until the grout has cured sufficiently to support the post independently. Do not apply load to the balustrade until the grout has fully cured.
Not Sure What You Need?
Submit a free DIY Guidance request and one of our experts will confirm whether grout or epoxy is the correct setting compound for your installation, and how much you will need.
